The BendPak HDS-18E is a commercial-grade 18,000-pound capacity four-post lift engineered for professional automotive, fleet, agricultural, and heavy-duty truck service. Featuring 249-inch extended runways, ALI certification, and a robust electric-hydraulic lifting system, the HDS-18E is designed to safely lift long-wheelbase trucks, vans, commercial vehicles, and industrial equipment while maintaining exceptional stability, durability, and ease of operation.
Its fully enclosed lifting components, galvanized aircraft cables, oversized cable sheaves, and automatic multi-position locking system provide years of dependable service in demanding shop environments.
Features
- 18,000 lb. lifting capacity
- ALI Certified
- Extended 249-inch runways for long-wheelbase vehicles
- Non-skid treaded runway surfaces for improved tire grip
- Single hydraulic cylinder mounted beneath the runway
- Electric-hydraulic lifting system
- Integrated hydraulic flow restrictor
- Heavy-duty galvanized aircraft lifting cables
- Supersized 12-inch cable sheaves reduce cable wear
- Large 4-inch sheave axles increase component life
- Built-in grease fittings (grease nipples) for easy maintenance
- Fully enclosed lifting cables, airlines, safety latches, and sheaves
- Spring-loaded safety locks automatically engage during lifting
- Secondary slack-cable safety lock system
- Pneumatic push-button lock release
- Multiple adjustable locking positions
- Adjustable safety ladders for precise runway leveling
- Heavy-duty 12″ × 12″ steel base plates
- Durable powder-coated finish
- Quiet 45 dB hydraulic power unit
- Optional rolling bridge jacks available for wheel and brake service
Specifications
Capacity
| Specification | Value |
|---|---|
| Lifting Capacity | 18,000 lbs. (8,165 kg) |
| Front Axle Capacity | 9,000 lbs. |
| Rear Axle Capacity | 9,000 lbs. |
Lifting Dimensions
| Specification | Measurement |
|---|---|
| Minimum Runway Height | 8.5 in. |
| Maximum Rise | 60 in. |
| Maximum Lift Height | 68.5 in. |
| Full Rise Time | Approximately 75 seconds |
Overall Dimensions
| Specification | Measurement |
|---|---|
| Overall Width | 154 in. |
| Outside Length | 257 in. |
| Overall Length | 297 in. |
| Column Height | 93 in. |
Interior Dimensions
| Specification | Measurement |
|---|---|
| Width Between Columns | 134 in. |
| Drive-Through Clearance | 109 in. |
Runway Dimensions
| Specification | Measurement |
|---|---|
| Runway Width | 22 in. |
| Runway Length | 249 in. |
| Width Between Runways | 38 in. or 56 in. |
| Runway Centerlines | 60 in. or 78 in. |
| Outside Edge Width | 82 in. or 100 in. |
Minimum Wheelbase Capacity
| Vehicle Load | Minimum Wheelbase |
|---|---|
| 100% Capacity | 185 in. |
| 75% Capacity | 160 in. |
| 50% Capacity | 135 in. |
| 25% Capacity | 110 in. |
Locking System
| Specification | Value |
|---|---|
| Locking Positions | 9 |
| Lock Spacing | Every 6 in. (152 mm) |
Power Unit
| Specification | Value |
|---|---|
| Motor | 220 VAC, 60 Hz, Single Phase |
| Noise Level | 45 dB |
Shipping
| Specification | Value |
|---|---|
| Shipping Weight | 6,003 lbs. (2,722 kg) |
| Shipping Dimensions | 265 in. × 27 in. × 35 in. |
Advanced Safety Features
The HDS-18E incorporates multiple redundant safety systems for dependable operation:
- ALI Certified design
- Automatic spring-loaded safety locks
- Secondary slack-cable locking system
- Integrated hydraulic flow restrictor
- Pneumatic push-button lock release
- Adjustable safety ladders for runway leveling
- Fully enclosed cables and moving components
Heavy-Duty Construction
Designed for continuous commercial use, the HDS-18E features:
- Oversized 12-inch cable sheaves
- Heavy-duty galvanized aircraft cables
- Large 4-inch sheave axles
- Massive 12″ × 12″ base plates
- Powder-coated steel construction
- Maintenance-friendly grease fittings throughout
Optional Rolling Bridge Jacks
The HDS-18E is compatible with optional air-hydraulic rolling bridge jacks that allow technicians to lift either axle off the runways for:
- Tire replacement
- Brake service
- Suspension repairs
- Steering work
- Differential service
Using two rolling jacks enables all four wheels to be lifted simultaneously while the vehicle remains supported by the lift.
Ideal Applications
The BendPak HDS-18E is well suited for servicing:
- Heavy-duty pickup trucks
- Commercial vans
- Fleet vehicles
- Utility trucks
- Class 3–5 work trucks
- Large SUVs
- Agricultural equipment
- Industrial machinery
- Long-wheelbase service vehicles
Reviews
There are no reviews yet.